IMPIANTO NEXO PS10+LS600+DTDAMP4X1.3
Vendo sistema NEXO anche a pezzi
2 NEXO PS10 R2 € 1800
1 NEXO LS600 € 1100
1 DTDAMP4x1.3C. € 1100
1 coppia di stativo con bag in omaggio
NOTA:I PREZZI INDICATI SONO DA INTENDERSI IVA ESCLUSA
Chiamare al 081 824 8249 per verificare la disponibilità del prodotto
Disponibile: 2-3 Giorni Lavorativi | Non Disponibile: 4-7 Giorni Lavorativi
PayPal, Carte di Credito e di Debito, PostePay, Bonifico Bancario
SPECIFICATIONS PS10R2
Frequency Response [a] 65 Hz - 20 kHz ±3dB
Usable Range @-6dB [a] 58 Hz - 21 kHz
Sensitivity 1W @ 1m [b] 99 dB SPL Nominal – 97 dB SPL Wideband
Nominal Peak SPL @ 1m [b] 129 to 132 dB Peak
HF Dispersion [c] 50° to 100° Hor. x 55° Vert.
Rotatable Horn 4 positions
Directivity Q & DI [c] Q : 16 Nominal DI : 12 dB Nominal ( f > 3 kHz )
Crossover Frequencies 2 kHz Passive
Nominal Impedance 8Ω
Recommended Amplifiers 500 to 1250 W / 8 Ω
FEATURES
Components 1 x 10” (25cm) Neodymium 8Ω driver
HF 1 x 1” throat driver + Low Distortion Constant Directivity
Asymmetrical Dispersion Horn
Height x Width x Depth 515mm x 316mm x 277 mm
(20.28” x 12.44” x 10.91”)
Weight 14 kg (31 lbs
Connectors 2 x NL4MP Speakon 4 pole
Construction Baltic Birch Ply finished with textured black coating
Fittings 2 Metal recessed pockets
Front finish Moulded dark grey metal grill
Flying Points One plate connecting with external accessories
Stand fittings Built in Steel Stand Fitting, (35mm 1 3/8”)
SPECIFICATIONS LS600
Frequency Response [a] 40 Hz - 110 Hz ±3dB
Usable Range @-6dB [a] 38Hz - 120 Hz
Sensitivity 1W @ 1m [b] 101 dB SPL Nominal
Nominal Peak SPL @ 1m [b] 135 to 138 dB Peak
Crossover Frequencies 40-85, 40-120 or 60-120 Hz
Nominal Impedance 8Ω
Recommended Amplifiers 1000 to 2000 Watts / 8Ω
FEATURES
Components 1 x 15” (38cm) long excursion Neodymium 8Ω driver
Height x Width x Depth 435mm x 688mm x 528 mm
(17.12” x 27.09” x 20.79”)
Weight 30 kg (66 Lbs)
Connectors 2 x NL4MP Speakon 4 pole
Construction Baltic Birch Ply & textured black coating
Fittings Handles 2 Metal recessed pockets
Flying Points One plate connecting with external accessories
Stand fittings Internal Steel Stand Fitting on top (35mm, 1 3/8”) allows pole mounting
SPECIFICATIONS DTDAMP4X1.3
Number of channels 4 x amplifiers channel, 2 by 2 bridgeable
Max. output voltage (no Load) 4 x 135 Volts
Max. output power (4 x 8 Ohms) 4 x 750 Watts
Max. output power (4 x 4 Ohms) 4 x 1300 Watts
Max. output power (2 brigde x 8 Ohms) 2 x 2600 Watts
Frequency response +/- 0.5 dB from 20 Hz to 20 kHz
Input impedance 10 kOhms
Input sensitivity +8 dBU
Nominal Gain 32 dB
Dynamic Range (A-weighted) > 110 dB
THD+N Typical 0.01%
FEATURES
Analog audio inputs 4 x balanced analog inputs on XLR
Power outputs 4 x SP4 outputs
Link switch To use same XLR input for 2 x adjacent channels
Mains sockets IEC C14 Inlet with secure lock
Switch and knobs Mains On/Off switch and volume control knob per channel
View meters 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel
Amplifier status Amp Ready and Temperature indicator per channels pairs
Mains voltage Factory set for 120 volts of 230 volts mains operation
Power consumption (Idle) 65 Watts
Power consumption 1/8 max. / 4 Ohms 900 Watts
Power consumption 1/4 max. / 4 Ohms 1800 Watts
Dimensions (W x H x D) 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U
Weight 7.5 kg
Operating temperature range 0°C - 45 °C
CE conformity 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS)
Electrical safety certification CSA, CB, EN60065
EMC certification EN55103-1 / EN55103-2 / FCC